Herunterladen Diese Seite drucken

Extel Entry 7 Installations- Und Bedienungsanleitung Seite 31

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 40
6. USER GUIDE
a. Using the videophone
• A call from the roadside panel triggers an audible alarm and switches on the monitor for
approximately 30 seconds. When the visitor has been identified, press the
Note: The
button only needs pressing once to communicate with the roadside panel.
• When the conversation is finished wait for the end of the time-out (approximately 1 minute) or press the
button
to turn the monitor off.
• Prolonging the image:
To prolong the image a further 60 seconds, press the
Press the
key again to switch off the monitor.
• Activating a latch:
The latch or lock is triggered when the
• Activating an automatic mechanism:
To activate an automatic control, press the
NB: The opening functions are only valid if the screen is switched on.
b. Controls on the videophone
4 controls are located on the side of the monitor:
• Selection of the ring tone (12) (monitor on stand-by).
• Ring tone volume adjustment (15)
• Contrast adjustment (14).
• Brightness adjustment (13).
7. TECHNICAL CHARACTERISTICS
a. Monitor (MN ENTRY 7)
• Reference: 810305
• Power supply: 17 V
• Consumption: 8 W
• Screen: 18 cm - 7''
• Resolution: 420 TV lines
• Size (mm): 210 x 120 x 22
c. Power supply
• Adapter: 100-240V~, 50/60Hz; 17 V , 1A
8. OPTIONS
• All Extel electric catches
• All Extel electric locks
• All Extel motors
• MODULO B modular power supply (wiring fig. 4)
key. Press the
button is pressed.
button.
(fig.2.1)
b. Roadside panel (PL ENTRY 7)
• Reference: 820305
• Camera: C-MOS Colour
• Viewing angle: H60° V42°
• Operating temperature: -20°C to + 55°C
• Light sensitivity: approx. 0.1 Lux
• Strike plate control: 12V - 700mA maximum
• Door control: Breaking capacity 12V 2A
• Size (mm): 120 x 160 x 40
CFI EXTEL - ENTRY 7 - 05/2017 - V1
button to talk.
key to switch off the video signal.
GB4

Werbung

loading

Diese Anleitung auch für:

720305