Werbung
Verfügbare Sprachen
Verfügbare Sprachen
12. After each use of wet vacuuming mode, the sponge filter should be washed with water and dried
prior to next use (Fig. 12).
CAUTION! Do not pour water into the tank when using the wet vacuum function! This container
will gradually fill with water during the process of its collection.
CLEANING CARPETS
1. Ensure the power cord is disconnected from the power source (Fig. 1).
2. Place the sponge filter on the float chamber, ensuring it covers the entire element (Fig. 2 and Photo
1).
3. Place the top cover on the container and lock using with clamps situated on both sides (Fig. 3).
4. Insert the end of the suction hose into the air suction inlet and tighten it to the right and the
washing liquid supply hose into the hose outlet socket. Ensure they have been mounted correctly
(Fig. 4).
CAUTION! The hose for feeding the washing liquid enters the appropriate outlet socket'
"click" ensures the proper mount. Press the white button for dismantling it.
5. Remove the washing liquid container from the foot, unscrew the cover counterclockwise and fill
it with clean water mixed with washing liquid in proportions provided by the liquid manufacturer
(Fig. 5).
6. Insert one end of the hose into the hose inlet socket. Place the other end of the hose with the
mesh filter in the washing liquid container, and then tighten the nut clockwise (Fig. 6).
7. Insert the aluminium tube into the remote control handle and correctly insert the washing liquid
supply hose into the appropriate sockets in the tube and handle (Fig. 7).
EN
41
Werbung
