Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CAUTION! Before using the vacuum cleaner, please pair the control panel module with the vac-
uum cleaner!
DRY VACUUMING
1. Ensure the power cord is disconnected from the power socket (Fig. 1).
2. Loosen the container clamps (Fig. 2).
3. Lift the top cover off the container (Fig. 3).
4. Mount the HEPA filter on the float chamber by pressing it to the top cover firmly (Fig. 4) and put
the paper dirt bag on the inner air sucking inlet (Fig. 3)
5. Place the top cover on the container and lock it using the container clamps on both sides of the
vacuum cleaner (Fig. 5).
6. Mount the suction hose by screwing it to the right to the air suction inlet and the washing liquid
supply hose to the hose installation socket (Fig. 6).
CAUTION! The hose for feeding the washing liquid enters the appropriate outlet socket'
"click" ensures the proper mount. Press the white button for dismantling it.
7. Connect the aluminium tube with the suction hose holder, properly connect the washing liquid
supply hose to the appropriate sockets (Fig. 7).
8. If necessary, select two connected aluminium tubes in order to increase the operating radius (Fig.
8)
9. Connect the floor and carpet head to the aluminium tube (Fig. 9).
10. Plug in the power cable (Fig. 10).
11. Press the power switch, the indicator light on the top cover panel will illuminate (Fig. 11).
EN
39
Werbung
