Videoconnection At Catvision-Mc-Cpu; Optional Connections - G&D CATVision Installation Und Bedienung

Guntermann & Drunck GmbH

Then connect the other end of the
Delta Ribbon 20pole) with the interface VGA Keyb. Mouse CPU of
CATVision.

Connection of the transmission cable
Connect the K-C7-x extension cable to the TRANSMISSION (jack)
interface of the transmitting unit.

Connection of the local console
Connect the connector of the local keyboard and the local mouse to
the keyboard interface or rather MOUSE PS/2 at the transmitting unit
CATVision-CPU.

Connect the local monitor to the MONITOR jack.
3.1.1

Videoconnection at CATVision-MC-CPU


Connect the 15 pole Sub HD connector of the
the additional VGA interface of the computer.

Then connect the other end of the
interfaces VGA CPU 2 – 4.
3.1.2

Optional Connections

Port for the
RS232-M/F-2 to the serial
port of the local PC
Mouse PS/2 RS 232
Red. Power
Keyb PS/2. 12V DC/0,6A Transmission

Connection of RS232
Connect the RS232-M/F-x connecting cable (x=2, 4, 6 or 9 m) with a
COM interface of the computer and the RS232 interface (optional) of
the CATVision-CPU (seizure 1:1).
Connection for the CAT-x cable
K-C7-x for USB 1.1
Audio connection
via Audio-M/M-2
Line In Line Out USB K/M
CPU
Monitor VGA Keyb. Mouse CPU
page 9
Operating Instructions
CATVision (MC)
CPU-x cable
(MDR 20 = Mini
VGA-M/M-2-cabel
VGA-M/M-2-cabel
Connection to the USB-Port
of the local PC
USB 1.1
Trans CPU
to
with the