One for All SMART CONTROL PRO Bedienungsanleitung Seite 6

ENGLISH
GOOGLE TV SETUP
The Smart Control Pro can also control devices using the
Google TV operating system, such as a newer Google
Chromecast (with Google TV), or a Sony or TCL TV. It can
also support some systems running Android TV, such as the
Nvidia Shield.
To set up the device using the My Nevo app, select the
device type, for example a TV or a Streaming Device, and
select Google TV.
ry. The Google TV device should start searching and at that
point you will be asked by the My Nevo app to hold down
the Home key for 10 seconds. After 10 seconds your Google
TV Device should find the Smart Control Pro – please select
it using the ORIGINAL REMOTE.
Next, when prompted by
the My Nevo app open
the Settings Menu on your
Google TV device and select
Remotes and Accessories
and then Pair New accesso-
After this the Google TV
Device should be set up as
a device on the STREAM key
of the Smart Control Pro
remote as well as added to
an Activity.
ACTIVITY SETUP
The Smart Control Pro combines devices into Activities for
ease of control. An Activity can contain up to 3 devices; a
TV, a source device and an audio device such as a sound bar,
and a good example of an Activity is Watch TV. If for example
you set up a TV, an Amazon Fire stick and a sound bar, the
remote will control all these.
Pressing the Watch TV key will turn on these three devices
and select the right input on your TV.
The remote will remember which devices are powered on,
and pressing the Power key will turn them all off at once.
6
The Smart Control Pro can
also use voice search on
Google TV devices. Simply
hold down the Menu/Mic
button and hold the top of
the remote close to your
mouth to speak.