Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
CHAPTER 7
RESETTING AND FACTORY SETTINGS
7.1 GENERAL SYSTEM RESET
ATTENTION
Press only as a last resort to restart the system.
Triggers a general module reset and reloads set values saved in eeprom. Press as a last resort only in order to restart the module. If, for
whatever reason, the module becomes blocked, wait approximately 10 seconds for the module itself to automatically launch a general
reset. If this does not reset the system, use this key and contact a customer care centre.
Reset key sequence, press SET for 20 seconds.
7.2 RESET FACTORY SETTINGS
ATTENTION
Loads all default values and deletes all previous values entered.
The factory values can be loaded by pressing a sequence of keys.
Key sequence to reset setting, press DOWN, ESC, ARROW DOWN, ESC, ARROW DOWN, ESC, press for 10 seconds.
Press SET to confirm reset.
7.3 SOFTWARE VERSION
Key sequence to see the software version, ARROW UP for 5 seconds.
40
Werbung
