Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GeneralInformation
• Installation and repair work may be carried out by authorized
technicians only and with the appropriate tools.
• After an interruption in the electrical or pneumatic supply,
ensure that the process is restarted in a defined or controlled
manner.
• The device must only be operated when in a perfect condition
and in consideration of the operating instructions.
• The general rules of technology apply to application planning
and operation of the device.
NOTE!
Electrostatic sensitive components/modules!
The device contains electronic components which react sensitively
to electrostatic discharge (ESD). Contact with electrostatically
charged persons or objects are hazardous to these components.
In the worst case scenario, they will be destroyed immediately or
will fail after start-up.
• Observe the requirements in accordance with EN 61340-5-1
and -5-2 to minimize/avoid the possibility of damage caused by
a sudden electrostatic discharge!
• Also, ensure that you do not touch electronic components when
the power supply voltage is present!
All manuals and user guides at all-guides.com
Type 8821
4.
GENERAL INFORMATION
4.1.
Contact address
Germany
Bürkert Fluid Control Systems
Technik Center
Christian-Bürkert-Str. 13-17
D-74653 Ingelfingen
Germany
Tel. + 49 (0) 7940 - 10 91 110
Fax + 49 (0) 7940 - 10 91 448
E-mail: info@de.buerkert.com
International
Contact addresses can be found on the final pages of the printed
operating instructions.
And also on the Internet at:
www.burkert.com
4.2.
Warranty
The warranty is only valid if the functional unit is used as intended in
accordance with the specified application conditions.
4.3.
Information on the Internet
The operating instructions and data sheets for Type 8821 can be found
on the Internet at:
www.burkert.com
english
7
Werbung
