Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. The Bluetooth interface of the APPCON is now active. You now
All manuals and user guides at all-guides.com
have 60 seconds to pair the app with the APPCON in the set-
tings of the app. Follow the instructions of the app (App set-
tings).
5. In the settings you can enter the tire size for your wheel and the
number of poles of your dynamo. Done.
6. Please note that the APPCON 3000 only supports one connec-
tion simultaneously. You cannot operate an APPCON 3000 on
two telephones at the same time. Unfortunately this is not tech-
nically possible.
7. The app, on the other hand, supports several simultaneous
connections. In addition to the APPCON 3000, it is possible to
connect further Bluetooth sensors, e.g. the Cadence or pulse
sensors of NC-17.
Important Note: Firmware Update
Your APPCON 3000 has the possibility to be always up to date.
This is made possible by so-called firmware updates, which we
install through the APPCONGT. If an update is available, the app
will inform you. Schedule approx. 10 min time. A progress bar will
be displayed. More help in the blog: www.APPCON3000.de
Charging the APPCON with a power supply unit
Only use commercially available USB power supplies with 5 volts,
otherwise the APPCON may be damaged. Note: Very often the ori-
ginal charger of your mobile device is also suitable. The APPCON
scope of delivery includes the charging cable with USB connection
to the power supply unit and a 6-pin round plug, which is plugged
into the APPCON.
Your APPCON is now charging and the LED lights up or flashes
blue as long as the charging process lasts. As soon as the APP-
(power supply not included)
43
Werbung
