MR TAPCON 230 Montageanleitung Seite 35

2. Remove the SFP module dust plug.
Figure 32: Remove the dust protection
3. Insert the fiber-optic cable with LC duplex into the SFP module COM-X4 in-
terface.
4. Connect the COM-X5 to the CPU-X2 using the supplied patch cable.
Figure 33: Connecting CPU-X5 and COM-X2
Serial fiber-optic cable
You will need the CM-0847 FO converter if you want to connect your control
system via the serial fiber-optic cable.
Connect the serial fiber-optic cable and the converter to the CPU-X5 inter-
face.
5.4.5.4 Ethernet interface
Connect the Ethernet cable (RJ45 connector) to the COM-X3 interface.
7820658/06 EN Mounting
35