Bit 3: If this error occurred because of a paper jam, for example, remove the cause of the error,
and then DEL ENQ n (1 ≤ n ≤ 2) can be used to recover from the error.
not possible to recover from any error due to a circuit problem (e.g., broken wire).
Bit 6: If a head overheat error is detected and the printing is stopped until the head
temperature falls.
(4) Paper detector status (when n = 4 is specified)
Bit
0
1
2,3
4
5,6
7
[See Also]
DLE ENQ, GS a, and GS r, "Identification of Send Status" in Appendix 3
At this time, bit 6 = "1."
Unused
Unused
Paper not found by paper near end detector
Unused
Paper found by paper end detector
Paper not found by paper end detector
Unused
Status
45
iDP3221 User's Manual
However, it is
Hex.
Decimal
00
0
02
2
00
0
10
16
00
0
60
96
00
0
CITIZEN