Inhaltsverzeichnis
Werbung
CAUTION:
• Be sure to use the specified paper roll.
• Use of non-specified paper may not guarantee the print quality, printing head life, and so on.
•
The printer cover is not detachable.
•
Do not insert a ragged or dog-eared end of the paper roll, because it could result in a paper jam or insertion
error.
•
Rewind the paper roll if the paper is slack.
is apart from the paper sensor, the printer may perform the operation described in 6. and 7. in 4.4.2
"Manually Inserting the Paper."
•
If the paper roll is skewed, pull the platen lever forward to correct its position.
•
When the paper roll has been set in place, the end of the paper may be fed from the paper outlet in a folded
or creased condition. If the paper does not appear at the paper outlet, check the end of the paper and set it in
place again.
•
Do not open the printer cover while printing.
•
Holding or touching the paper roll during printing may result in a paper jam.
• When the auto cutter is used for full cutting, remove the cut paper before starting the next print operation to
prevent jamming.
4.5
How to Remove Remaining Paper Roll
1. Open the printer cover.
2. Pull both platen levers in the direction of the arrow. The platen roller is then separated from the printing
head and the paper may then be removed.
CAUTION:
• When removing the paper (in either the
forward or reverse direction), pull the
platen levers in the direction of the arrow.
Do not apply an excessive force beyond its stopping position.
If there is too much slack in the paper roll, since the paper roll
13
iDP3221 User's Manual
Platen Lever
CITIZEN
Werbung
Inhaltsverzeichnis
