Werbung
Verfügbare Sprachen
Verfügbare Sprachen
HOLEX LED rechargeable rod lamp
de
4.
Commissioning
4.1.
CHARGING THE BATTERY
en
i
bg
Fully charge the rechargeable battery before first use.
ü Torch switched off.
da
1. Use the USB cable to connect the micro-USB 2.0 charging port on the lamp to the
power supply.
fi
▶ The charge status indicator lights up red whilst charging is in progress.
▶ When charging is complete, the charge status indicator light up continuously
fr
green.
2. Disconnect the lamp from the power supply.
it
5.
Operation
LED risk group 1 - IEC 62471
hr
WARNING
lt
Risk of blinding and injury to the retina
▶ Never look directly into the light beam.
nl
▶ Do not direct light beam at animals' or people's eyes.
▶ In the event of commercial use, the user must be instructed according to the acci-
no
dent prevention regulations.
pl
5.1.
SWITCHING THE LIGHTS ON/OFF
1. Press the on/off button in order to switch on the spotlight.
pt
2. Press the on/off button again in order to switch on the main light in "ECO mode".
3. Press the on/off button again in order to switch on the main light in "Full power
ro
mode".
4. Press the on/off button again to switch off the lamp.
sv
6.
Storage
sk
Before placing the lamp in storage, fully charge the battery. Store at temperatures
between -10°C and +40°C. Do not store in the vicinity of acidic, aggressive, chemical
sl
substances, solvents, humidity and dirt.
7.
Cleaning
es
Disconnect from the power supply before starting cleaning. Clean with a slightly damp
cloth. Do not use chemical, alcohol-based, abrasive or solvent-based cleaners.
cs
8.
Technical data
hu
Lamp
Illumination of spotlight
zh
8
Approx. 100 lm
Werbung
