Dometic 8 Serie Montageanleitung Seite 21

RM(x)8xx6
5.4 Installing the ventilation grill
No. in
fig. e, page 5
1
2
3
4
➤ Proceed as shown (fig. f, page 6 to fig. h, page 6).
5.5 Install the roof vent
No. in
fig. i, page 6
1
2
➤ Proceed as shown (fig. j, page 7 to fig. k, page 7).
5.6 Installing the flue duct
I
NOTE
Do not install an additional flue stack, as this leads to poor performance
and increases the power consumption of the refrigerator.
The flue duct is installed at the factory. Proceed as follows when you have removed
the flue duct and want to reinstall it (fig. l, page 7):
➤ Place the T-piece (1) onto the flue pipe (2).
➤ Direct the T-piece at an angle of 45° towards the rear wall.
➤ Attach the T-piece and flue pipe with a screw (3).
EN
Description
Installation frame
Ventilation grille
Winter cover
Slider
Description
Installation frame
Hood
Installing the refrigerator
21