Fiat DUCATO 2022 Kurzanleitung Seite 26

29
 insert the assembled tool fig. 23
provided with the appropriate
extension (B) fig. 22 on the screw
(A) fig. 22 of the spare wheel
housing manoeuvring device and
turn it clockwise to allow the spare
wheel to be raised until it is fully
seated in the housing under the
floor, checking that the notch on
the device has appeared in the
window on the hook (D) fig. 23
 check replaced wheel positioning
under the floor (the lifting system
is supplied with a clutch to limit
the end of the stroke). Incorrect
positioning may jeopardise safety
 place the tools back in the drawer/
tool bag
 place the tool bag / compartment
in its housing under the passenger
seat
24
39) 40)
ATTENTION
29) Use your hazard warning lights,
warning triangle, etc. to show that your
vehicle is stationary. Passengers should
get out of the vehicle, particularly if it is
heavily loaded, and wait for the wheel
to be changed away from the traffic.
F1A0385
Engage the parking brake. In the event
of a wheel change on a slope or on
unsurfaced roads, put any object as stop
under the wheels.
30) The spare wheel supplied (for
versions/markets, where provided) is
specific for your vehicle. Therefore, it
must not be used on other models. Do
not use spare wheels of other models on
your vehicle. The wheel bolts are specific
for your vehicle: do not use them on
different models and do not use bolts
from other models on your vehicle.
31) Repair and refit the standard wheel
as soon as possible. Do not apply
grease to the bolt threads before fitting:
they could come unscrewed.
32) Use the jack only to replace wheels
on the vehicle with which it is supplied
or on other vehicles of the same model.
Never use the jack for other purposes,
such as lifting other vehicle models.
Never use the jack to carry out repairs
under the vehicle. Incorrect positioning
of the jack may cause the lifted vehicle to
fall. Do not use the jack for loads higher
than the one shown on its label.
33) Never tamper with the inflation
valve. Never introduce tools of any kind
between rim and tyre. Check tyre and
spare wheel pressure regularly, referring
to the values shown in the "Technical
Data" chapter of the Owner Handbook.
34) No tools other than the crank
provided should be used with the
spare wheel lifting device; it should be
operated by hand only.
35) On versions equipped with self-
levelling air suspension, never introduce
the head or hands in the wheel arch. The
vehicle could raise or lower automatically
depending on possible load or
temperature changes.
36) The device should only be operated
by hand, without using any type of
tool other than the crank provided like
pneumatic or electrical screwdrivers.
37) The moving components of the
jack (screws and joints) can also cause
injuries: avoid touching them. If you
come into contact with lubricating
grease, clean yourself thoroughly.