25) The system only warns that the tyre
pressure is low: it is not able to inflate
them.
26) Insufficient tyre inflation increases
fuel consumption, reduces the tread
duration and may affect your ability to
drive the vehicle safely.
27) Always refit the valve stem cap after
inspecting or adjusting tyre pressure.
This prevents dampness or dirt from
entering the valve stem and thus the
pressure control sensor from being
damaged.
28) The tyre repair kit (Fix&Go) provided
with the vehicle (for versions/markets,
where provided) is compatible with
the TPMS sensors; using sealants not
equivalent with that in the original kit may
adversely affect its operation. If sealants
not equivalent with the original one are
used, it is recommended to have the
TPMS sensor operation checked by a
qualified repair centre.
20
DRIVING TIPS
In daily use, the consumption of an
electric vehicle may depend on the
following factors, which can have a
considerable impact:
Vehicle maintenance
Tyre pressures
Unnecessary loads
Roof rack/ski rack
Electric devices
Climate control system use
Devices for aerodynamic control
CHANGING A
WHEEL
CHANGING PROCEDURE
29) 30) 31) 32) 33) 34)
Stop the vehicle in a position that
is not dangerous for oncoming
traffic and where you can change
the wheel safely. The ground
must be as level and compact as
possible
stop the engine and engage the
parking brake
engage first gear or reverse
wear the reflective safety jacket
(compulsory by law in certain
countries) before getting out of the
vehicle
indicate that the vehicle has
broken down using the devices
required by the law in the current
country (e.g. warning triangle,
hazard warning lights, etc.)
In the event of a wheel change on
a slope or on unsurfaced roads,
put any object as stop under the
wheels
remove the tool bag under the
passenger seat
The container includes these tools
fig. 18:
(A) - tow hook
(B) - rod for spanner
(C) - bolt spanner
(D) - jack
(E) - extension for spanner
(F) - screwdriver grip
(G) - screwdriver bit