Sewing Drive Parameters - Dürkopp Adler 550-12-23 Bedienungsanleitung

6.2 Base Parameters
6.2.1 Sewing Drive Parameter List
The meaning and the influence on function of the individual
parameters are to be found in the operating instructions of the sewing
drive.
ATTENTION !
The changes may only be made by trained, skilled personnel.
It is necessary to restart the controls after changing these parameters
in order for all alterations to become effective.
–
Hold down the "Y" key and tap the "E" key.
The following display appears :
The sewing drive parameters can be displayed and altered.
–
Briefly operate the "Y" key.
This advances the parameters one at a time.
–
Hold down the "Y" key and tap the "E" key.
This switches back into the normal mode.
No. Name
0 CRC
1 reserved
2 Direction of rotation
3 Rpm 10
4 Rpm 20
5 Rpm 30
6 Rpm 40
7 Max. rpm
8 Positioning speed
9 Max. brake flank
10 First position running-in
11 First position running-out
12 Second position running-in
13 Second position running-out
14 Third position running-in
15 Third position running-out
16 Idle brake
17 Stop flank
18 First brake flank
19 Second brake flank
20 P divider
21 I divider
22 Lead angle
23 Targeted positioning
3
Standard Value
0
0
0
1000
2000
3000
4000
3000
500
25
10
30
160
180
430
470
5
32
10
250
1
160
0
0
25