Stahl SolConeX 8570/16 Serie Betriebsanleitung Seite 23

Function and device design
EN
For assembly and installation
EN
• Have mounting and installation performed only by qualified and authorised persons
EN
(see "Personnel qualification" section).
• The device is only to be installed in zones for which it is suited based on its marking.
EN
• During installation and operation, observe the information (characteristic values and
EN
rated operating conditions) on the rating, data and information plates located on the
EN
device.
• Before installation, make sure that the device is not damaged.
EN
EN
Commissioning, maintenance, repair
EN
• Only have commissioning and repairs performed by qualified and authorised persons
(see "Personnel qualification" section).
EN
• Before commissioning, make sure that the device is not damaged.
EN
• Perform only maintenance work described in these operating instructions.
EN
3.4 Modifications and alterations
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
4 Function and device design
EN
EN
EN
4.1 Function
Application range
The coupler socket 8570/16 is an explosion-protected electric equipment. It connects
portable and stationary electrical equipment as well as electric lines and circuits in
hazardous areas. It is approved for use in hazardous areas of Zones 1, 2, 21 and 22.
6
SolConeX Coupler Socket
Series 8570/16
Explosion hazard due to modifications and alterations to the device!
Non-compliance results in severe or fatal injuries.
• Do not modify or alter the device.
No liability or warranty for damage resulting from modifications and
alterations.
Explosion hazard due to improper use!
Non-compliance results in severe or fatal injuries.
• Use the device only in accordance with the operating conditions
described in these operating instructions.
• Use the device only for the intended purpose specified in these
operating instructions.
DANGER
DANGER
150663 / 8570609300
2017-04-25·BA00·III·en·06