3.2.3 Aperture Priority Mode - Gossen Sixtomat Digital Gebrauchsanleitung

3.2.3 Aperture priority mode
- Select
13
with the function buttons.
- Set the desired aperture with the value but¬
tons.
Note:
The intermediate 1/1 Oth stop values stored
from the last measurement appear when the
aperture is preset. These are invalid because
the valid 1/1 Oth stops will only appear after the
next meter reading is taken.
- Measure by pressing the measuring button
M
- The measured shutter speed appears on
the right-hand digital display - Automatic
adaptation of the aperture in 1/1 Oth stops
to the measured shutter speed.
- Select other paired aperture/shutter values
with the value buttons.
36
«0
EV COR ISO
f
L L u
tun
JU
1.4 2 2.8 4 5.6 8 11 16 22 32 45 64 90