ETNA CM250 Serie Bedienungsanleitung Seite 39

BEFORE USE
Installation of the hooks
1
a
2
b
3
Installation of the racks
Note the difference between the left and right rack.
The left rack
Attention
Incorrect positioning of the side racks can cause arcing.
Install the hooks with 'R' at the rear holes of the cavity.
Install the hook with 'F' at the front holes of the cavity.
Please remove the tape on the side of the cavity before the
installation of the hooks.
1. First, install the hook into hole 'a'.
2. Then, push the hook into hole 'b'.
3. Finally, push the hook down into the right place.
1
2
The right rack
3
1
2
3
EN 11