Setting The Clock - ETNA CM250 Serie Bedienungsanleitung

BEFORE USE

Setting the clock

Setting the current time
When the oven is connected to mains power '00:00' will appear in the display. The clock will
work as long as the microwave oven is connected to the mains.
1. Touch the time/temperature key.
The hour indicator and the clock symbol will flash.
2. Use the slider or the "- / +" keys to enter the correct hour.
3. Touch the time/temperature key again.
The minute indicator will flash.
4. Use the slider or the "- / +" keys to enter the correct minute.
5. Finally, touch the time/temperature key again to confirm the set time.
The current time and clock symbol appear in the display.
The time can be adjusted in standby mode; touch the time/temperature key until the
hours indicator starts to flash. Set the clock as described above.
EN 8