POCO line 5951923/01 Benutzerhandbuch Seite 68

8. Always observe the required minimum distances for proper ventila-tion.
9. Do not connect the appliance to the electric supply unless all pack-
aging and transit protectors have been removed.
10. Operate the appliance with 220~240V/50Hz/AC only. All connec-tions and
energy-leading components must be replaced by an authorized
professional. Do not use a socket board or a multi socket when
connecting the appliance to the mains.
11. A dedicated and properly grounded socket meeting the data of the
plug is required to minimize any kind of hazard. The appliance must
be grounded properly.
12. Always check that the power cord is not placed under the appliance or
damaged by moving the appliance.
13. The technical data of your energy supplier must meet the data on the model
plate of the appliance.
14. Your domestic circuit must be equipped with an automatic circuit breaker.
15. Do not modify the appliance.
16.Turn off the power before you install the appliance and before you
connect it to the mains. RISK OF FATAL ELECTRIC SHOCK!
17. Disconnect the appliance from the mains before you clean or main-
tain it. RISK OF ELECTRIC SHOCK!
18. Remove possible dust accumulation at the power plug, at the safety
power socket and at all plug connectors regularly. RISK OF FIRE!
19. Keep the cord away from heated surfaces.
20. The power plug must always be accessible after installation.
21. Do not use a socket board or a multi socket when connecting the
appliance to the mains.
22. Do not modify the appliance.
23.Do not connect the appliance to an energy saving plug (e.g. Sava
Plug) and to inverters which convert direct current (DC) into alternat-
ing current (AC), e.g. solar systems, power supply of ships.
9