Cleaning Of The Water Dispenser - POCO line 5951923/01 Benutzerhandbuch

WARNING! Do not use hairdryers, electrical heaters or other
technical devices to accelerate the defrosting-progress. RISK
OF ELECTRICAL SHOCK!
1. Remove the contents from the freezing-compartment and put them
into a cooling box.
2. Place a container in front of the appliance to catch the water.
3. When the encrusted ice melts put some dry cloths into the
freezer-compartment to hold the water back.
4. Do not use hot water to accelerate the defrosting operation.
5. Remove the big pieces of ice first.
6. Afterwards remove the small pieces of ice.
7. Wipe and dry the appliance and door seals with dry and soft cloths.
8. After cleaning leave the door open for some time to ventilate the
appliance.

6.2 Cleaning of the water dispenser

WARNING! Remove all overflowed or spilled water from the
appliance or the floor. RISK OF SLIPPING! RISK OF ELECTRIC
SHOCK!
❖
Empty the water tank before you remove it.
Clean all parts of the water tank and the dispenser using hot
❖
soapy water before you use the dispenser for the first time.
❖
You have to remove the water tank for cleaning.
1. Hold both sides of the water tank
tightly; then lift and remove it from the
door at an angle of 45
Ensure that the water valve (C) at the
bottom of the water tank has come free
of the opening in the door (B)
completely.
a) When removing the water tank it is possible that the sealing ring
(A) of the water valve (C) is also pulled out of the door of the
appliance. In this case, you must replace the sealing ring.
Proceed as follows:
H
OW TO REMOVE THE WATER TANK
0 carefully.
48
: