Bosch 8 OptiMUM-Serie Gebrauchsanleitung Seite 58

en Troubleshooting
15 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out by trained specialist
staff.
▶
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
The appliance is not
working.
Appliance does not
start processing.
Release button cannot
be pressed.
Scales show no
change in weight des-
pite ingredients being
1
added.
Processing with the
SensorControl Plus
function starts briefly
but immediately stops
1
again.
1
Depending on the appliance specifications
58
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
▶ Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
▶ Check the circuit breaker in the fuse box.
There has been a power cut.
▶ Check whether the lighting in your kitchen or other
appliances are working.
Rotary switch is set incorrectly.
▶ Set the rotary switch to
An accessory is fitted to red drive 3.
▶ Remove the accessory from drive 3.
Quantity of ingredients outside measuring range of
scales.
▶ Add at least 5 g or 0.01 lb so the scales show cor-
rect values.
Rotary switch was not held to
Select the required automatic programme again.
1.
→ "SensorControl Plus", Page 53
To start processing, set the rotary switch to
2.
and hold in this position for at least 2 seconds.
before processing.
long enough.