"Pasta" programme
You can use this programme to cook pasta or noodles.
fixed pre-set
temperature
Configurable time
Keep-warm function
Symbol in the display
1) Add water to the inner bowl
2) Insert the inner bowl
3) Close the appliance lid
4) Press the menu button
5) If you want to change the preset cooking time of 8 minutes, press the min/-
button
6) Close the appliance lid
7) Press the start button
ance heats up.
8) Wait until the appliance has heated up. Once the desired temperature has been
reached, you will hear a beep. The set time starts counting down.
9) Open the appliance lid
again.
10) As soon as the set time has elapsed, you will hear 5 beeps.
When the programme finishes, the appliance switches to the keep-warm mode
for a maximum of 24 hours.
■
If you want to stop a programme or the keep-warm function, press the stop
button
■
222
│
GB
.
into the base
.
until the "Pasta" symbol flashes.
to set the minutes.
.
. The "start" indicator lamp lights up and the appli-
, add the noodles or pasta, and close the lid
.
105°C
8–20 minutes
in 1-minute increments
yes
up to 24 hours
.
SMUD 860 A1