Installing The Control Unit; Installation Instructions - Kessel Ecolift L Mono SWA Einbau- Und Betriebsanleitung

4.8 Connecting the ventilation pipe
WARNING
If the ventilation pipe is not connected, this can
have a negative effect on the sensors in the tank.
This can cause complete functional failure of the
system.
Cut the socket for the ventilation pipe to the required
length .
At the end of the ventilation socket (OD 70), route a venti-
lation pipe (OD 70) to above the roof
4.9

Installing the control unit

Install the control unit in accordance with the instructions enclosed with the unit.
Safely lay all cables of the electrical components.
4.9.1 Control units for the Ecolift L
The following installation and operating instructions are supplied depending on the version.
Product
Ecolift L / Ecolift L Bypass
Ecolift L FKA
The system's control units must be positioned in such a way as to prevent any unauthorised use.
Consequential damage can occur in the building if the system is switched off accidentally.
36 / 136
.

Installation instructions

016- 328 Ecolift L 230 V control unit
see enclosed document
Installation and operating instructions 016-319