Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.1 Application
The Minilift is a wastewater lifting station
designed for pumping sewage free waste-
water (no WC connection) according to DIN
EN 12056.
The ‚Resistant' system variant is additional-
ly suitable for a combination of
wastewater and salt-laden media as well as
for condensate from condensing
boiler systems.
1.2 Product description
1.2.1.Above floor/free standing installation
installed in a free standing / above grade
area. The Minilift chamber is ventilated th-
rough an integrated activated charcoal filter
which keeps any type of odor problems in
the room of installation to a minimum. A se-
parate (roof-exiting) ventilation pipe can be
connected to the system if desired.
The Minilift is an excellent choice for below
grade renovations which include installa-
tions of showers, sinks, washing machines,
etc. The newly installed fixtures can simply
be plumbed into the Minilift which in turn
will be connected to the existing building's
1. General
wastewater piping (above the backwater
level). Multiple inlets can be connected to
the Minilift using the quickinstall KESSEL
inlet adaptors (Illustration 2).
The pump is also equipped with a quickre-
lease lock (Illustration 1) for pump removal.
1.2.2.In the slab (below grade) installation
The Minilift for in the slab / below grade
installations consists of a pumping chamber
with cover and inlet grate. Multiple inlets can
13
also be connected to the Minilift using the
quick-install KESSEL inlet adaptors (Illustrati-
on 2) and the pump can be removed using the
quick-release lock (Illustration 1).
Deeper installation depths can be accomoda-
ted by the use of a KESSEL variable height
adjusting section which is available upon
request. A separate ventilation pipe can be
connected to the system if the inlet grate is
removed and replaced with an available se-
aled cover.
Werbung
Inhaltsverzeichnis
