ABB ACSM1-04 Schnellinstallationsanleitung Seite 8

8
Control cabling
The drive comes with a clamp plate that can be
fastened at the top or the bottom of the JCU
Control Unit.
0.7 N·m
(6.2 lbf·in)
Quick installation guide - ACSM1-04/04Lx
Use shrink tubing
or tape to contain
strands
Remove outer jacket
of cable at clamp to
expose cable shield.
Tighten to 1.5 N·m
(13 lbf·in)