Fault Remedy - AL-KO EASY 4.2 P-S Betriebsanleitung

Fault remedy

Attention!
Cutting blade and motor shaft may not be aligned if damaged!
Fault
Motor does not start
Reduced motor performance
Unclean cutting
completely
Wheel drive does not function
Do not rotate wheels with
gearbox switched on
Unit vibrates strongly in an
unusual way
If faults are not listed in this table or you are unable rectify them yourself, please contact our customer service
department.
Solution
Filling with petrol
Set speed lever to "Start" position
Switch on the choke
Press the motor switch lever to the upper bar
Check the spark plug, replace, if necessary
Turn the mower blade free
Charge the starter battery
Start on mowed surface
Correct cutting height
Sharpen / replace mower blade
Clean discharge chute / housing
Reduce working speed
Sharpen / replace mower blade
Correct cutting height
Correct cutting height
Allow lawn to dry
Sharpen / replace mower blade
Clean the grass catcher grid.
Clean discharge chute / housing
Adjust the Bowden cable
V-belt defective
Contact the customer service workshop.
Remove dirt in the wheel drive, V-belt, and transmission.
Lubricate freewheels (drive pinion on drive shaft) with spray oil
Retighten wheel bolts
Wheel hub defective
V-belt defective
Contact the customer service workshop.
Check mower blade
GB
33