CAUTION - PRODUCT DAMAGE
•
Do not alter the product in any way and use only original replacement parts. Have
all repairs carried out in a professional workshop or from similarly qualified persons
- improper repairs can lead to serious risks for the user. Use the product for the
intended purposes as described in this user manual only.
•
Shield the product from spraying water, moisture, high temperatures and direct
sunlight.
INFORMATION ON ASSEMBLY
•
Assembly of the product must be carried out carefully by an adult person. Ask for the
assistance of another, technically-skilled person in case of doubt.
•
Before beginning assembly of the product, read all assembly steps carefully and
review the diagram.
•
Remove all packaging materials and place all individual components on a free
surface. This will give you a good overview and simplify assembly. Shield the
assembly surface from filth and scratching by laying down suitable padding.
•
Check the components against the components list to make sure all are present. Do
not dispose of the packaging materials until assembly is complete.
•
Please note that there is always a risk of injury when using tools to carry out manual
tasks. Therefore, please exercise caution when assembling this product.
•
Make sure your work environment is hazard-free. For example, do not leave any
tools lying around.
•
After assembling the product according to the instructions, make sure that all
screws, bolts and nuts are installed correctly and tightened.
•
If necessary, lay out protective padding (not included) beneath the product to protect
your floor as there is no guarantee that, for instance, the rubber feet will not leave
marks behind.
SP-SUB-001-W-IM-DE+GB+FR.indb 20-21
20
3. EXPLODED DIAGRAM
21
8/6/2016 4:12 PM