SYMA X200W Bedienungsanleitung Seite 15

1. Define the Front
When you turn on the power for the first time and start the drone, the direction of the nose of
the drone is straight ahead.
2. Enter and Exit of Headless Mode
① After the pairing is completed, press the "Headless Mode" button, and the remote
control will emit a "beep beep.." sound, the indicator light on the drone will flash slowly,
indicating that it has entered the headless mode. Press the "Headless Mode" button
again. When you hear a long beep sound, the drone exit the headless mode.
② In the headless mode, the operator does not need to identify the position of the nose of
the drone but only needs to control the drone according to the direction of the joystick of
the remote control.
Trimming
Trimming forward and backward
When the drone is hovering in the air and drifting forward or backward automatically, you can press
and hold the trim button and push the right joystick in the backward or forward direction to adjust
until the drone is stable and then release it.
Trimming left and right
When the drone is hovering in the air and automatically drifting to the left or right, you can press and
hold the trim button and push the right joystick to the right or left direction to adjust until the drone
is stable and then you can release the trim button.
12