Problem
Red and green LEDs
do not illuminate to
indicate the Battery is
correctly charging
Battery Pack has low
Capacity
Angle Grinder cannot
be switched on
(ON/OFF Switch (8)
does not move)
Angle Grinder does
not start when trigger
switch and Safety
Switch are operated
Batteries do not belong in the household
garbage.
For battery disposal please check with your
local council.
Troubleshooting
Possible Cause
Battery not correctly
connected to Charger
Charger not Powered
Battery not being fully
charged
Battery pack has
been charged over
100 Times and
Capacity has started
to reduce
The Safety Switch (7)
may not have been
operated
Battery completely
discharged
Defective Battery
Angle Grinder
defective
35
Solution
Clean Battery Socket
of charger and battery
contacts and fully
slide on to Charger so
it snaps into Place
Recheck Mains
Connection
Do not remove
Battery until a full
Charge is indicated
This is normal for
Battery packs.
Contact Westfalia
purchase a replace-
ment Battery Pack
Press the Safety
Switch (8)
Recharge Battery or
replace with a fully
charged Battery
Replace Battery
Contact the Westfalia
customer service