Werbung
The face spanner can be stored in the auxiliary handle (6).
1. Clean the disc seating flange and the flange nut of all grinding
residue.
2. Mount the grinding disc as shown on the picture. Attach the flange
nut according to the used disc.
3. Lock the driving spindle by depressing the spindle lock button (1).
Hold the driving spindle lock button and use the provided face span-
ner to tighten the flange nut.
4. Before switching on the machine rotate the grinding disc by hand to
check if it is properly mounted and turns freely. Always perform a
test run first (see chapter operation). Disassembling is done in
reverse order after screwing of the flange nut with the face spanner.
Depressed-Centre
or straight Grinding
Disc
Depressed-Centre
Cutting Disc
Operation
Straight
Cutting Disc
Clamping Flange
Flange
Clamping
Flange
Flange
Clamping
Flange
Flange
31
Werbung
