Operating Elements And Displays; Wifi Control - CASO DESIGN WineChef Pro 40 Original Bedienungsanleitung

14.1 Operating elements and displays

► Use the buttons
5-20°C.
► Temperature recommendations: Red wine: 12°C – 16°C and white wine 6°C – 10°C.
► The device can achieve the best cooling and consumption results at a recommended
ambient temperature of 16-20 °C.
► When both - up and down zone - are working, the temperature of upper zone must be
lower than or equal to the temperature of down zone.
► In case of high temperature difference between both zones the energy consumption of the
device may be higher as indicated in the technical data.
If you press the power button of :
Down zone -> the down zone is switched on/off
When the LED lights the device is working.
With pushing both
exchange between °C and °F.
You can set the temperature as your desire: With
temperature by 1°C among 5-20°C.
You switch the interior light on or off by pressing the "Light" button. The light will switch
off automatically after 4 hours to save energy.
The temperature in the device depends on the room temperature, the quantity of bottles and
the chosen temperature. Please note that your device is intended to cool wine. The
maximum temperature that can be reached inside the device cannot be significantly ABOVE
the ambient temperature at the setup location.

14.2 WiFi control

The device can optionally also be controlled / programmed via app via WiFi. Download the
CASO-App to your smartphone or tablet. Details about the app, the scope of operation and
installation instructions can be found on our website www.casoapp.com/help
Please note
and to set the temperature for both zones in the range of
and for 5 seconds, the temperature display mode will be
Upper zone -> the device is switched on
and you can adjust the
35