Timer; Child Proof Lock Function - CASO DESIGN Gastro 3500 Eco Original Bedienungsanleitung

• With the +/- buttons you can choose between the temperature levels which will then be
shown in the display. You can set temperatures between 60°C and 240°C (60°C, 80°C,
100°C, 120°C, 140°C, 160°C, 180°C, 200°C, 220°C, 240°C).
► Especially during roasting with very little fat, the temperature at the pot bottom rises
very rapidly and the limit of 150-170 ° C is reached quickly, so you should switch to the
temperature mode when roasting. Here, the maximum temperature is 240 ° C.
15.4.4

Timer

• Select power mode or temperature mode. Press timer button (6). In the display 120 min
is shown.
• You can set the desired time (max. 180 minutes) in 10-or 1-minute intervals using +/-
buttons.
• The display alternates between timer or function setting.
• When the set time has elapsed an audible signal sounds and the device automatically
switches to Standby mode.
• Note: You can always change the set time using the +/- buttons. The previously set
temperature and power level remain unchanged. If the power or temperature level is
reset, the selected time remains unchanged.
15.4.5

Child proof lock function

• Press button lock (7) until the control lamp lights up. When locked, all buttons are
disabled except On/Standby button.
• Deactivate the childproof lock by pressing the lock button for around 3 seconds until the
indicator light goes out.
► You can always change the set time using the+/- buttons.. The previously set
temperature and power level remain unchanged. If the power or temperature level is
reset, the selected time remains unchanged.
► Disconnect the power plug from the power outlet as soon as the cooking process has
ended.
► In power mode the maximum temperature is limited to 150-170°C. Higher temperatures
trigger the overheat protection. You should use this mode for cooking food and heating
water.
► In temperature mode the maximum temperature is limited to 240°C. You should use this
mode for roasting food when fat needs to be heated to a high temperature.
► When you switch off the device via "On/Standby" and the temperature of the cooker
plate surface is lower than 50°C, the display shows „L". When the temperature of the
cooker plate surface is over 50 °C, it is displaying „H".
Please note
Please note
44