Loading The Rinse Aid - Haier XI6C3D0FB Bedienungsanleitung

LOADING THE RINSE AID

(see reference figure "A" - "A3")
THE RINSE AID
The rinse aid, which is automatically released
fig."A" - "A3"
during the last rinsing cycle, helps the dishes to
dry quickly and prevents spots and stains
forming.
FILLING THE RINSE AID CONTAINER.
The rinse aid container can be found to the left
of the detergent container (fig."A"- "A3"). To
open the lid, push the reference mark and, in the
same time, pull the tab of opening. It is always
advisable to use rinse aid that is specifically
designed for dishwasher. Check the rinse aid
level through the indicator eye (C) which is
located on the dispenser.
FULL EMPTY
dark light
REGULATING THE RINSE AID FROM 1 TO 6
The regulator (D) is placed under the lid and can
be turned using a coin. The recommended
position is 4.
The limestone content of the water
considerably affects the formation of limescale
and the drying performance.
It is therefore important to regulate the quantity
of rinse aid to achieve good washing results.
If, after the wash, streaks occur on the dishes,
decrease the amount by one position. If whitish
spots occur, increase the amount by one
position.
EN 94