Loading The Safety Program; Testing The Safety Program - TR-Electronic AD 582 Serie Gesamt-Bedienungsanleitung

Safety Program Creation - Configuration Example
All necessary blocks are now displayed in the project window:

4.6 Loading the safety program

When the safety program has been generated, it can be loaded into the F-CPU. It is
advisable to transfer the complete safety program to the F-CPU in STOP operating
status. This guarantees that a consistent safety program is loaded. The program is
loaded with the menu Options --> Edit safety program --> Download switch.

4.7 Testing the safety program

After generating the safety program, a complete functional test must be carried out
according to the automation task.
After modifications to an already completely function-tested safety program, it is
sufficient to test the modifications.
 TR-Electronic GmbH 2013, All Rights Reserved
Page 74 of 79 TR - ECE - TI - DGB - 0233 - 03
Printed in the Federal Republic of Germany
07/15/2015