Programme Start - Programme End - Miele PDW 909 SOM Kurzgebrauchsanweisung

en - Washing
Starting a pro-
gramme
Removing the
laundry
94
Programme start – programme end
The programme can be started as soon as the Start/Stop sensor con-
trol is flashing on and off.
Touch the Start/Stop sensor control.

The door will lock ( symbol) and the wash programme will start.
 Status

Time left
Whites
 prog. info
Tip: You can use the pull-down menu to display the selected temper-
ature, spin speed and any selected Extras.
If a delay start period ( Timer) has been selected, this will appear in
the display at the bottom left.

Overview

9,0/9,9 kg
Whites
90 °C
0:56 h
01.01 11:00 Help
If you select the  prog. info selection area, all programme-related
information will be displayed.

Programme info

1: Time after start: min

2: Programme finish time:
3: Block:
4: Step:
 prog. info
Once the delay start period has elapsed (if applied), the programme
running time will appear in the display; otherwise, the running time
will appear straight away. The programme sequence is also shown in
the display.
Depending on the setting selected in the supervisor level or in the
programme, the machine will switch to the anti-crease action cycle at
the end of the programme. The door remains locked. The door can be
unlocked at any time by touching the Start/Stop sensor control.
Pull open the door.

Remove the laundry.

 11:02

2:27
Washing and heating
10:00
1300 rpm
Extras
Details
 11:02

2:27