Calling Up Current Programme Parameters; Programme Running Time/Time Left Estimation; End Of The Programme - Miele PDR 914 Kurzgebrauchsanweisung

Calling up current programme parameters

During the programme running time, you can use the pull-down menu to view the paramet-
ers of the current drying programme (e.g. drying level, load capacity, selected Extras, dry-
ing temperature).
 Status 

Time left
Cottons
To call up the pull-down menu, swipe your finger from top to bottom during the pro-

gramme running time.

Parameter info
Normal
7,0 kg

 64 °C
The pull-down menu displays the parameters of the drying programme.
To close the pull-down menu again, swipe your finger from bottom to top.


Programme running time/Time left estimation

The programme running time depends on the quantity of laundry, the type of fabric, the re-
sidual moisture in the laundry and the water hardness. The displayed programme running
time for drying-level programmes can therefore vary or "jump". The tumble dryer's elec-
tronic module adapts during the ongoing drying programme. The displayed programme
running time becomes more and more accurate.
When using the programmes for the first time, the displayed time sometimes deviates sig-
nificantly from the real time left. The difference between the estimated and achieved time
becomes smaller if the corresponding programme is run more often. If different load sizes
are dried in one programme, the time left display can only show an approximate time.

End of the programme

End of the programme
The laundry will be cooled down shortly before the end of the programme. The message
Finish/Cool down
will appear on the display during the cooling phase. The laundry can now
be removed.
After the cooling phase and the drying programme is completed, the message
played.
The tumble dryer will switch off automatically after the set time after the end of a pro-
gramme.
11:02
2:27 h
Drying
en - Drying
Finish is dis-
133