Cleaning The Drum And The Outside Of The Casing - Miele PDR 914 Kurzgebrauchsanweisung

en - Cleaning and maintenance

Cleaning the drum and the outside of the casing

 Risk of death due to electric shock.
The tumble dryer must be completely disconnected from the power supply before per-
forming cleaning or maintenance work.
Before starting cleaning or maintenance work, always switch off the tumble dryer at the
main switch (on site).
Do not use a pressure washer or water jet to clean the tumble dryer.
Clean the tumble dryer casing, control panel and plastic parts with a mild cleaning agent

or with a soft, damp cloth only. Then rub the tumble dryer casing, control panel and
plastic parts dry.
Abrasive cleaning agents must not be used to clean the tumble dryer.
The tumble dryer drum must be wiped clean with a soft, damp cloth after drying items

that have been starched.
Check the seal.

Check the latches on the drum door and fluff filter compartment cover.

The air intake vent is located on the rear of the tumble dryer.
This vent must never be covered or blocked with objects.
Keep the area around the tumble dryer – in particular the air intake – clear of fluff.
136