INVENTOR MFVI-09WFI Benutzerhandbuch Seite 6

Operation
AUTO,COOL,HEAT,DRY,FAN
Operation
1.
QUIET
2.
HEALTH
MODE I FEEL
AIRFLOW
select an operation mode.
SLEEP
HEALTH TURBO
EXTRA
10℃
ECOSENSOR FUNCTION
CONFIRM
TIME TIME
ON OFF
CANCEL
LOCK LIGHT RESET
●Each pressing of the button advances
the mode setting in sequence.
AUTO COOL
4
Unit start
Press MODE button and
MODE
HEAT
FAN DRY
Mode
In AUTO mode, the air conditioner will automatically
select Cool or Heat operation according to room
AUTO temperature. When FAN is set to AUTO, the air con-
ditioner automatically adjusts the fan speed accord-
ing to room temperature.
COOL Cooling only
In DRY mode , when room temperature becomes
DRY lower than temp.setting+2ºC, the unit will run inter-
mittently at LOW speed regardless of FAN setting.
In HEAT mode, warm air will blow out after a short
period of the time due to cold-draft prevention func-
HEAT tion. When FAN is set to AUTO,the air conditioner
automatically adjusts the fan speed according to
room temperature.
In FAN mode , the unit will not operate in
COOL or HEAT mode but only in FAN mode,
FAN AUTO is not available in FAN mode. And
temp. setting is disabled. In FAN mode, Sleep
operation is not available.
3.
is pressed, temp. setting increases
1 °C.
is pressed, temp. setting decreases
1 °C.
QUIET
Unit will start running to reach the
temp. setting on LCD.
HEALTH
MODE I FEEL
AIRFLOW
HEALTH SLEEP TURBO
4.
EXTRA
10℃
FUNCTION
ECOSENSOR
TIME TIME CONFIRM
ON
OFF
CANCEL
LOCK LIGHT RESET
Press FAN SPEED button. For each
press, fan speed changes as fol-
lows:
Unit will run at selected fan speed.
AUTO
LOW
Note
Press TEMP button
Every time the button
Every time the button
FAN SPEED
MID HI