Electrical Connection - Balluff BML-S1G0-7-M5EG-0 Serie Betriebsanleitung

BML-S1G0-_7_ _-M5EG-_0(-SA42)-_ _
Absolute magnetic encoder system
4
Installation and connection (continued)
4.2

Electrical connection

The electrical connection is made using a connector. See
Tab. 4-4 for the pin assignment.
Note the information on shielding and cable
routing on page 17.
Connector S284
The magnetic encoder system is connected via a 12-wire
cable (see Accessories on page 31).
Fig. 4-10: M12 plug pin assignment (view on pin side)
www.balluff.com english 15