Factory Settings; Technical Data; Useful Information - Blaupunkt Heavy Duty Serie Kurzanleitung

NORMSET
Restoring the original factory settings of the
car sound system.
Press the rotary control and the display
shows "PLEASE CONFIRM".
Press the rotary control again to confirm
the resetting.
The car sound system switches off and is
reset to the factory settings.

Factory settings

Important factory settings in the user menu:
Menu item Factory setting
TUNER AREA
EUROPE
HICUT 1
RDS ON
REGIONAL OFF
TRAFFICINFO
OFF
SENSITIVITY HI
PTY OFF
TRAFFIC VOL 20
BEEP ON
SCAN TIME 8 SEC
DIMMER MANUAL
HOUR MODE 24
CLOCK SET 00:00
In the user menu, you can restore the original f
actory settings of the car sound system (see the
chapter "User settings", section "Making settings
in the "VARIOUS" menu", menu item "NORMSET").

Useful information

Warranty
The warranty terms can be called up from
www.blaupunkt.com.
Service
If you ever need to use a repair service
you will find information about service partners
in your country under
www.blaupunkt.com.
25
DURBAN224 DAB BT
Factory settings | Technical data
Additional information on the functions of the
device can be found in the instructions at
www.blaupunkt.com

Technical data

Voltage supply
Operating voltage: 10.5 – 14.4 V
Heavy duty model: 16-24V
Current consumption
In operation: < 10 A
10 swc. after swith-off
: < 3.5 mA
er
Output power: 4 x 24 watts sine at 14.4 V /4 ohms
4x50 watts max. power
Tuner
Wavebands in Europe/Asia/Thailand:
FM: 87.5 – 108 MHz
AM (MW): 531 – 1,602 kHz
LW (Europe only): 153 – 279 kHz
Wavebands in the US:
FM: 87.7 – 107.9 MHz
AM (MW): 530 – 1,710 kHz
Wavebands in South America:
FM: 87.5 – 107.9 MHz
AM (MW): 530 – 1,710 kHz
FM frequency response: 30 – 15,000 Hz
Pre-amp out
4 channels: 4 V
Dimensions and weight
W x H x D: 178 x 50 x 110 mm
Weight: approx. 0.85 kg
25
22.05.19 17:00