More Training Functions; Interrupt Training; Evaluation Of The Training Data On The Device; Evaluation Of The Training Data Using Software - VDO Cyclecomputing R5 GPS Handbuch

More training functions

Interrupt training

If you would like to interrupt the training for a longer period of time, e.g. for a longer lunch break, you can switch off the R5 GPS. To do this, open the quick menu
(in AutoPause or while training is in progress) and select the menu item Switch off.
To wake up the device and continue your training, switch it on as usual. You can also use the device when the Turn off training.
As long as the data is not reset by long pressing the + button, you can continue the current training.
ATTENTION: If a training session is continued over several days, the date of the last day is only written at the end. Connect the R5 GPS in this period of time with the PC, the
training session is closed.

Evaluation of the training data on the device

Select Storage > Total to see an overview of all exercise data performed on the device.
Here you can get:
Total kilometers

Total time

Total vertical meters uphill

You can also set the total values again via the SIGMA RIDE app, e.g. after resetting the device firmware.

Evaluation of the training data using software

SIGMA RIDE App

With the SIGMA RIDE app you can carry out an extensive evaluation of your training data. Different training parameters, graphics, etc. are displayed for each training unit.
You can also export your training data to third-party portals directly from the SIGMA RIDE app. Please refer to the sharing menu of the app to find out which portals are
available for this. To view previous training units, switch to the activity list and select the relevant unit.

Third party providers

The training data of the R5 GPS is available as a .FIT file. Therefore all portals that use this standard
can read the data of the R5 GPS. You can export to relevant third-party providers using the
SIGMA RIDE app.
If the portal you want is not available for automatic synchronization, you also have the option
of uploading the .FIT files directly to the third-party provider. To do this, you have to connect
the R5 GPS to the PC via a USB-C cable. The training data can then be found in the Activities folder.