Navigating With The R5 Gps; Back To Start Navigation Search&Go Track - VDO Cyclecomputing R5 GPS Handbuch

Navigating with the R5 GPS

With the R5 GPS you have various options for navigating. These are described below.
Back to Start Navigation

Search&Go

Track

If there is a track on the R5 GPS, it can be started or canceled under the „Navigation" item in the main menu, but also in the shortcut menu.
As soon as a route (Search&Go) is transferred to the R5 GPS or a track is started, the navigation page is displayed, showing the track, the turn-by-turn instructions and
the distance to the next turn. You can also configure these fields on any other training page with the SIGMA Ride App.
Back to Start navigation
With the back to start navigation you can find your way back to the starting point in almost any situation. The arrow navigation always points directly to the starting point of
the training unit and shows you the direct distance to the starting point.
Search & Go
The Search & Go function is a one-point navigation. With the help of this, you have the option of navigating to any destination quickly and easily.
When the route is planned, the relevant turn-by-turn directions will be displayed on your R5 GPS.
The procedure is as follows:
Connect SIGMA RIDE APP and R5 GPS

Navigation > Search & Go

Enter the destination or select a point on the map

Determine route

– Routing option can be selected over die bike icon
Start the route or save it as a track

Track
With the track function you can transfer a created track to the R5 GPS and start it. To transfer the track to the device, there are different possibilities.
Via the Navigation Icon:
My Tracks

Select Track

The track is now transferred to the R5 GPS and can be
ridden directly (Please note: the R5 GPS must be
switched on and connected to the SIGMA RIDE App.
Via the Track menu:
Choose track

„..." Menu

Send track to device

Now the track can be selected through the main menu
or the short cut menu of the R5 GPS.