Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
All manuals and user guides at all-guides.com
d) Function "Rain" (symbol "
In the basic display mode of the weather station, select the function "Rain" with the button " " (6) or
" " (7). The corresponding symbol (see above) blinks.
The following setting options and displays are available now:
Switching the display data
Briefly press the button "SET" (5) or "MEMORY" (3) to switch between the following displays:
• Current rain quantity (display e.g. "1.0mm/hr")
• Rain quantity in the past hour (display "LAST HOUR")
• Rain quantity in the past 24 hours (display "LAST 24Hr")
• Yesterday's rain quantity (display "YESTERDAY")
• Rain quantity in the past week (display "LAST WEEK")
• Rain quantity in the past month (display "LAST MONTH")
Deleting the value memory for the rain quantity
Keep the button "MEMORY" (3) depressed approx. 3 seconds to delete the value memories.
Turning the rain quantity alarm on/off
You can activate an alarm for the rain quantity. When the set rain quantity is exceeded, an alarm is issued (stop this
by pressing the button "ALARM/CHART").
• Briefly press the button "ALARM/CHART" (1) to access alarm mode ("ALARM HI", bottom right of the display), then
briefly press the button " " (6) or " " (7) to activate/deactivate the alarm.
When the alarm is deactivated, the display shows "OFF"; when it is activated, the respective value.
Setting the rain quantity alarm
• First, briefly press the button "ALARM/CHART" (1) to access alarm mode (display "ALARM HI"). Then briefly press
the button " " (6) or " " (7) to activate the alarm (if it is deactivated).
• Now keep the button "ALARM/CHART" (1) depressed until the rain value blinks.
• You can change the rain value with the buttons " " (6) or " " (7) (keep the respective button depressed longer
for quick adjustment).
• Save the setting by briefly pressing the button "ALARM/CHART" (1).
76
")
Werbung
Inhaltsverzeichnis
Fehlerbehebung
