Conrad TE827NL Bedienungsanleitung Seite 78

All manuals and user guides at all-guides.com
Step 4:
Briefly press the "SET" button (5) to access the next setting.
Step 5:
If "USR" was selected as city code (see step 3), you now have to enter the geographic location in degrees longitude
and latitude (entering the arc degree and arc minute is also possible). Otherwise skip to step 6.
Now two lines "- -" blink for the degree of latitude. Enter the degree of arc with the button " " (6) or " " (7) (keep
this depressed longer for quick adjustment) and confirm your entry with the button "SET" (5).
Now two lines "- -" blink for the minute of arc. Enter the minute of arc with the button " " (6) or " " (7) (keep this
depressed longer for quick adjustment) and confirm your entry again with the button "SET" (5).
Now "N" or "S" blinks. With the button " " (6) or " " (7), select whether this is the northern ("N") or southern ("S")
degree of latitude. Confirm the setting by pressing the "SET" button (5).
Now two lines "- -" blink for the degree of longitude. Enter the degree of arc with the button " " (6) or " " (7) (keep
this depressed longer for quick adjustment) and confirm your entry with the button "SET" (5).
Now two lines "- -" blink for the minute of arc. Enter the minute of arc with the button " " (6) or " " (7) (keep this
depressed longer for quick adjustment) and confirm your entry again with the button "SET" (5).
Now "W" or "E" blinks. With the button " " (6) or " " (7), select whether this is the western ("W") or eastern ("E")
degree of longitude. Confirm the setting by pressing the "SET" button (5).
"0:00 - TZ" now blinks on the display. Enter the time zone with the button " " (6) or " " (7) (+15....-13 hours are
possible). Confirm the setting by pressing the "SET" button (5).
"DST" and "NO" blink on the display. Here you have to set whether there is a change from daylight savings time
to normal time and which one is supposed to be used. The appendix contains more detailed data. Confirm the
setting by pressing the "SET" button (5).
Step 6:
The year blinks on the display. Set this with the button " " (6) or " " (7) (keep it depressed for longer as usual
for quick adjustment). Confirm the setting by pressing the "SET" button (5).
Step 7:
The month blinks on the display. Set this with the button " " (6) or " " (7). Confirm the setting by pressing the
"SET" button (5).
Step 8:
The day blinks on the display. Set this with the button " " (6) or " " (7). Confirm the setting by pressing the "SET"
button (5).
Step 9:
"D" and "M" blink on the display. Here you can set the sequence for the display of the day and month (either day/
month = D/M or month/day = M/D). Select the sequence with the button " " (6) or " " (7). Confirm the setting
by pressing the "SET" button (5).
Step 10:
"24" (or "12") blinks on the display. With the button " " (6) or " " (7), set whether the time is to be displayed in
24 or 12 hour mode.
In 12 hour mode, "AM" is displayed for the first half of the day and "PM" for the second half next to the time on the
display.
Confirm the setting by pressing the "SET" button (5).
78