Led Indications - Victron energy MultiPlus 800VA 12/800/35 Anleitung

3.3 LED Indications

LED off
LED flashes
LED illuminated
Inverter/Charger
On / Off / Charger-only switch = On
The inverter is switched on and supplies power to the load.
On / Off / Charger-only switch = On
The inverter is switched on and supplies power to the load.
Pre alarm: overload, or
battery voltage low, or
inverter temperature high.
On / Off / Charger-only switch = On
The inverter is switched off due to one of the following alarms:
overload, or
battery voltage low, or
inverter temperature high, or
DC ripple voltage too high.
On / Off / Charger-only switch = On
The AC input voltage is switched through and the charger operates in
float mode.
Charger only
On / Off / Charger-only switch = Charger only
The AC input voltage is switched through and the charger operates in
bulk or absorption mode.
On / Off / Charger-only switch = Charger only
The AC input is switched through and the charger operates in float or
storage mode.
Note: the MultiPlus will shut down if four abnormal events occur within 30 seconds.
The MultiPlus can be reset by switching to Off and then to On.
All manuals and user guides at all-guides.com
7