Quitting The System - PIONEER DJ DDJ-RR Bedienungsanleitung

2 Press the [PLAY/PAUSEf] button to play the track.
3 Move the channel fader away from you.
4 Turn the [TRIM] control.
Adjust [TRIM] so that the orange indicator on the channel level indicator
lights at the peak level.
5 Turn the [MASTER LEVEL] control to adjust the audio
level of the speakers.
Adjust the sound level output from the [MASTER 1] and [MASTER 2]
terminals to an appropriate level.
! Sound is output from the speakers according to your audio
environment.
Monitoring sound with headphones
Set the positions of the controls, etc., as shown below.
Names of controls, etc.
HEADPHONES MIXING control
HEADPHONES LEVEL control
1 Press the headphones [CUE] button for the channel 1.
2 Turn the [HEADPHONES LEVEL] control.
Adjust the sound level output from the headphones to an appropriate
level.
Note
This unit and rekordbox dj are equipped with a variety of functions to
allow for more individualistic DJ performances. For details on each
function, see the Operating Instructions and rekordbox Operating
Instructions.
! The operating instructions of this unit can be downloaded from
the Pioneer DJ site. For details, see Viewing this unit's Operating
Instructions (p. 5 ).
! This operating instructions of rekordbox can be downloaded from
the rekordbox.com site. For details, see Viewing the Operating
Instructions of rekordbox (p. 5 ).

Quitting the system

1 Quit rekordbox.
2 Press the [STANDBY/ON] switch on this unit's rear
panel to set this unit's power to standby.
3 Disconnect the USB cable from your computer.
Position
Center
Turned fully counterclockwise
15
En