Monitoring Sound With Headphones; Turning Off The System - PIONEER DJ XDJ-RX2 Bedienungsanleitung

Monitoring sound with headphones

1 Connect headphones to the [PHONES] terminal.
2 Press the [CUE] button of the channel to be
monitored.
3 Rotate the [HEADPHONES MIXING] control.
Adjust the balance of the volume between the channel selected with the
[CUE] button and MASTER.
4 Rotate the [HEADPHONES LEVEL] control.
Adjust the volume of the headphones.
Setting monitor output
The [MONO SPLIT, STEREO] setting can be changed with UTILITY.
! [MONO SPLIT]: Outputs the sound of the channel selected with the
[CUE] button to [L] and the sound of MASTER to R.
! [STEREO]: Outputs the sound selected with the [CUE] button in
stereo.
For details on the functions, see the Operating Instructions for this
product.

Turning off the system

1 Press the [USB STOP] button for over 2 seconds.
Do not disconnect the USB device or turn off this unit while the USB
indicator is lit or flashing. Doing so could delete the managementdata of
this unit and damage the USB device, resulting in unreadable data.
2 Disconnect the USB device.
3 Close the USB slot cover.
4 Press the [u] switch.
This unit turns off.
14
En