Transmission Of Timer Programs Via Lan Module; Transmission Principle; Lan Module - Settings - Grasslin Talento Dialog Bedienungsanleitung

12. Transmission of timer programs via LAN module*

12.1 Transmission principle

A timer program created on a PC by means of the programming software can
be transmitted via a LAN network or the Internet to the LAN module and is then
transferred to the annual timer via Powerline.
Programs can also be transmitted from the timer to the PC via the LAN module.
A LAN module can only be synchronized with one timer!
12.2 LAN module – Settings
Before sending data to the timer via the LAN module or downloading data
from the timer, you have to configure the LAN module in the programming
software!
1. In the menu bar, select Options

settings for the LAN module.
The window "Configuration" opens.
 Z
2. Click on to set the respective workgroup.
*) Function not available for all products.
132
1 6 12 18 24 1 6 12 18 24
PLC
Power LAN
C1
15 : 26
15:26
FIX OVR
ON 2 ON 2
1 OFF 1 OFF
MENU MENU
Res. COM 1 2 1 2
Res.
Configuration LAN module, to make

The software can be used to manage a total number of 10 workgroups with
up to 10 LAN modules each.
2.
Abb. 66: Transmitting timer programs – LAN module settings